Hi Rick, Thanks for the tips.
>1) 150 ma "trickle" is a little high for the 8AA stack (20 hr charge
>rate>
You're right it should be .05 of 1500ma = 75ma

>4) Your input pins on the two regulators need a 0.1uf bypass to the GND
>pins of the regulators too.
OK, I added them same problem.

>5) Don't forget that your voltage divider/sampler draws a small amount of
>current from the battery when the charger is unplugged.
OK, I am still testing at this point.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads