Steve Kasm wrote:
>
> Hello All,

> My problem is that when I set portb,5 to a high in my software, I get a
> pulse out of the output pin that snaps the relay and then drops it. The
> only way I can get the relay to stay up is to put the bsf, portb,5
> instruction in a loop which basically sends a pulse train to the
> transistor that holds the relay up.

Try turning the WDT off.

--
Best regards

Tony

mICros
http://www.bubblesoftonline.com
mailto:sales@bubblesoftonline.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body