Thanks to all, especially for this link!
I will try my plotter again tonight.

Sherpa Doug

> -----Original Message-----
> From: Vit [mailto:piclist2001@HOTMAIL.COM]
> Sent: Tuesday, March 26, 2002 9:49 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [OT]: HP7475 plotter demo mode
>
>
> Sherpa,
>
> Turn the plotter off, then turn it on while holding the P1
> and P2 buttons.
> Also, check out this page:
>
> http://www.hp.com/cposupport/plotters/support_doc/bpp01379.html
>
> Vitaliy
>
>
> ----- Original Message -----
> From: Douglas Butler <dbutler@IMETRIX.COM>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: 03.26.2002 7:03 AM
> Subject: [OT]: HP7475 plotter demo mode
>
>
> > I am having trouble with a HP 7475a pen plotter, and I
> don't know if it
> > is a software or mechanical problem.  I think there is a stand alone
> > demo mode where the plotter makes its own sales leaflet,
> but I have no
> > manual and I don't know how to start it.  My thought is
> that if it can
> > plot its own leaflet then the motors and gears must be OK
> so the problem
> > would then likely be software.
> >
> > How do I make a HP7475 plot its demo leaflet?
> >
> > Sherpa Doug
> >
> > --
> > http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
> >
> >
> >
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body