My FAE told me the other day that the PICSTART+ didn't have enough free
space in the firmware for the 18F452 etc... He did say that the Promate
II would support it, but I didn't rush down to check.....

Hmm....

Kevin

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@mitvma.mit.edu] On Behalf Of Bob Ammerman
> Sent: 21 March 2002 20:18
> To: PICLIST@mitvma.mit.edu
> Subject: Re: [PIC]: 18F452 programming
>
>
> I believe there is a new flavor of MPLA B that supports the
> 18F's and includes a firmware file for the Picstart Plus.
>
> Bob Ammerman
> RAm Systems
> > Hi All
> >
> > So now the 18F452 is available for $6.08 each (Pioneer) I thought I
> > would use them instead of the 18C452.
> >
> > So how do you program these things?   I thought I was good
> to go with the
> > PICstart Plus but it does not support the 18F series.  The Promate
> > doesn't support them either.
> >
> > I may be interested in a ICD2 but I was hoping I could at least
> > program
> them
> > without that.
> >
> > Dave
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply
> us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>
>
> *****************************************************************
> This email has been checked by the altohiway e-Sweeper Service
> *****************************************************************
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body