"... My board house..."

Yes, someday I'd like to think that I will be outsourcing PCB's
regularly and would have a supplier that I could call "my board
house".  :-)

Out of curiousity though, don't the board houses require a
separate file for drills, etc?

I don't have the TIFF option in my (freebie) version of Eagle,
but I like this program enough that I'll haggling over picking up
a more complete version.

Thanks,
-Neil.


----- Original Message -----
From: "Jinx" <joecolquitt@CLEAR.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, March 20, 2002 4:24 PM
Subject: Re: [EE]: Eagle printing question...


> > Within Eagle, I can't figure out how to dump each side of a
> > 2-layer PCB to a regular inkjet printer
>
> Select TIFF as the output in the CAM Processor. My board
> house is quite happy to produce PCBs from a printout and
> they've done boards for me this way - no problem. I routinely
> use 8 mil tracks for SMT layouts and even under a magnifying
> glass the lines are perfect. The other big plus is that you can
> load the TIFF into a graphics program and add all sorts of
> graphics / text or modify traces
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.