Set a breakpoint somewhere in the interrupt code. It'll stop there, but
if you retfie out of it, you'll have to run it again to get back on to
the breakpoint. Afaik at least :)

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Micro Eng
Sent: donderdag 14 maart 2002 22:28
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: ICD watch window and interupts


In the animate mode, where you can watch the data in a window, do the
interupts not work? i.e....if I am using TMR0 to generate an interupt, I
never see it drop into it.  I am assuming thats normal and the only way
to drop into an interupt is by some sort of interupt on portB where you
can control it in semi real time.

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics