Rob,

We've just been discussing a very similar problem in the thread "[PIC]:
Unexplained Programming Error PIC16F84". Check that out.

Dave

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Robbie Werner
Sent: 14 March 2002 04:27
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: Programming error in 'PIC All'

Hi all,

I've been trying to get 'PIC All' to work with a P16Pro PIC programmer
but I
am getting an error whenever I try to program the PIC.  I can read data
off
the PIC ok, but when I try to write I get an error.

The error message is in a dialogue box called 'Verify' and says:

    | Program error:
    |
    | Program:  address=0000  buffer=2810  device=3FFF

Any thoughts as to what might be causing this?

Also, what values should I set Start Prog, End Prog, SN/ID, and
Fuse/Prot
to?

Any help greatly appreciated,

-Rob

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics