Hi Robbie

Had the same error message....and cured it by fitting the 330pf to the
programmer board although this is not recommended in most cases.

Worth trying.

----- Original Message -----
From: "Robbie Werner" <rwerner@BIGPOND.NET.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, March 14, 2002 8:27 AM
Subject: [PIC]: Programming error in 'PIC All'


> Hi all,
>
> I've been trying to get 'PIC All' to work with a P16Pro PIC programmer but
I
> am getting an error whenever I try to program the PIC.  I can read data
off
> the PIC ok, but when I try to write I get an error.
>
> The error message is in a dialogue box called 'Verify' and says:
>
>     | Program error:
>     |
>     | Program:  address=0000  buffer=2810  device=3FFF
>
> Any thoughts as to what might be causing this?
>
> Also, what values should I set Start Prog, End Prog, SN/ID, and Fuse/Prot
> to?
>
> Any help greatly appreciated,
>
> -Rob
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics