Hi Francois,
Not exactly what your looking for but some good working
examples that may help you solve your problem.
The examples do not use the built in CCS functions,
but should help you write something without them.
http://www.phanderson.com/PIC/PICC/index.html

Good Luck,
        Kevin

>Hi list,
>Please do you know if I can use SPI fonctions  from CCS compiler to
>drive a Dallas DS1615 (3 wires protocol component ) ?
>The pinout of the DS1615 is :
>Pin 10 = RST
>Pin 11 = Data I/O
>Pin 12 = SCLK
>I have a software sample for a Motorolla component but it use 4 pins
>like that :
>Pin 2 = RST
>Pin 3 = Data IN
>Pin 4 = Data Out
>Pin 5 = SCLK
>
>But the DS1615 have just one pin (bidirectional) for the data IN and
>data Out Can I use the SPI fonctions from CCS with the DS1615 ???
>Thank in advance for your precious help
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads