Can't you build a custom .HEX file modify program? It shouldn't be too
hard to make a program which replaces the 0x3FFF into 0x0000.

On another note: you wrote it's for determining a factory or a field
load. Do you have to have every 3FFF replaced by 0000? Can't you pick
ONE memory location and hardcode a pre-defined value there? You can make
it with MPASM using IFDEFs which trigger only for a factory build.

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Terence Monteith
Sent: woensdag 13 maart 2002 16:25
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: filling unused program memory


No, then I get overwrite errors.

-----Original Message-----
From: Claudio Tagliola [mailto:cptagliola@CHELLO.NL]
Sent: March 13, 2002 9:23 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: filling unused program memory


Can't you FILL the complete range as the first MPASM operator, and then
ORG back to the beginning?

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads