At 12:52 AM 3/10/02 -0600, Pic Dude wrote: >Someone else here suggested that, but the only boards I could find >locally were the MG boards, so I thought I'd just go with that. > >Where do I find these boards? The only ones I've found so far are >the MG Chemicals boards. I've made the offer before and will do so again - any hobbyist in the Edmonton, Alberta, Canada region who wants to laminate their own board is welcome to call me and come in on a Saturday. We use DuPont Riston 4315 laminate with a much modified Ibico laminator (supplied by Kepro, then modified some more) and have all the equipment to clean, laminate, expose, etch, clean and drill single and double sided boards. No plated through holes - we use Harwin track pins, Multicore Copperset PTH repair kit, or just do top side solder to components and machine pin IC sockets. dwayne Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 18 years of Engineering Innovation (1984 - 2002) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.