On Sat, 9 Mar 2002, David Koski wrote:

> I would like to know if anyone has actually accomplished reasonable power drain
> using internal pullups, how much power was consumed, and how it was
> accomplished.

Depends on what you call "reasonable".  If I had a better meter I could
tell you what mine's at now, but it meets my criteria for reasonable.

Datasheet says typical supply current is .4 to 2.1mA max with INTRC (which
I'm using) at 2.5Vdd (I'm at about 4-4.5V).  When awake but idling, no
loads connected, my Fluke says 700uA.  When it goes to sleep, data sheet
says .2 to 5 uA, my meter says 0.00 - meaning it's below 10uA, anyway.

Dale

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics