For this job I have used MC14094.

Diego Sierra wrote:

>Hi!
>
>For driving a 7 segments display with a PIC, I found some BCD to 7 segments
>latch+drivers, but I would like not to be limited to BCD numbers but to drive
>_any_ of the 7 segments while using a minimum number of output pins.
>
>A good solution seems to be the use of a shift register
>(serial-in/parallel-out), a latch and a driver for the 7 segments display. I
>cannot found all of that in just one chip. Could any of you give me a hint?, or
>point me to a schema?
>
>Thanks,
>Diego.
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>

--
  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu