>Does anyone know of any "gotchas" as far as differences between a
>windowed 18C452 and the ICE-2000 module?
>This is my first 18-series work, and everything works fine using the
>ICE-2000, but it doesn't run with a programmed part. I'm using MPLAB
>v5.40.00, PRO-MATE II v5.50.00, ICE-2000 module PCM18XA0, and as far as
>I can tell, all the configuration bits match between the emulator and
>programming the part.

Have emulated that part with the ICE 2000 and transferred to both the
windowed part and the flat pack with no problems.
Interestingly, I have Promate II v5.40, and mplab v5.50 (the versions
are the reverse of what you listed).
You mention the configuration bits - so at the risk of stating the
obvious:  the emulator ignores any configuration bit settings in your
file - they are all handled via menu options in mplab.
You might check the clock:  the emulator can hide a clock problem since
you can have it provide the clock.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu