But LVP _is_ enabled in the config on a brand new part.

Bob Amemrman
RAm Systems

----- Original Message -----
From: "Peter Onion" <ponion@SRD.BT.CO.UK>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, March 07, 2002 3:16 AM
Subject: Re: From 16F84 to 16F877


> Somewhere in the middle of a load of html you said
>
> "I have found keeping the LVP pin low during high voltage programming
> has eradicated programming errors I had been having if I left it
floating."
>
> I've built my own "high voltage" programmer which doesn't do anything with
> RB3 and not had any problems with errors at all.
>
> I wouldn't expect the state of RB3 to have any importance if LVP isn't
> enabled in the config word.
>
> YMMV
>
> Peter.
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu