> The gap between two characters is almost (if not exactly) the
> width of 1 dot. If you make your bar with every other dot on
> and every other dot off on instead of completely solid you get
> 3 levels per character and a bar without gaps. The 6th bit in a
> character (the gap between two characters) is then always off.
> This will require 3 user defined characters (1 line, 2 lines
> and 3 lines). Hope you understand what I mean.

When you update the user-defined-characters on the fly you need only two
udc's for a bar (a 'solid' and the 'top' ).

Wouter van Ooijen
--
Van Ooijen Technische Informatica: http://www.voti.nl
Jal compiler, Wisp programmer, WLoader bootloader, PICs kopen

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu