Hi=20 I remember I had same problem, when u go to development mode of the project choose ICD debugger, then it opens icd settings window , check enable debugging mode, then it should all work fine, if all else fail read the manual or help provided by microchip! -----Original Message----- From: Thomas N [mailto:thomasn101@HOTMAIL.COM]=20 Sent: Tuesday, March 05, 2002 6:55 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]: ICD does not run. Please help! Microchip has a demo program under develoment tool/ICD >From: Micro Eng >Reply-To: pic microcontroller discussion list >To: PICLIST@MITVMA.MIT.EDU >Subject: [PIC]: ICD does not run. Please help! >Date: Tue, 5 Mar 2002 08:07:17 -0700 > >Is there a FAQ or simple demo program to ensure that the hardware/software >is working? I'm about to do the same thing and would like a test file. > > >_________________________________________________________________ >Send and receive Hotmail on your mobile device: http://mobile.msn.com > >-- >http://www.piclist.com hint: The PICList is archived three different >ways. See http://www.piclist.com/#archives for details. > > _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.