Thank you everyone for your help! The crystal on the target board is running fine. I programmed one Micro using a programmer and it run OK on the target board. There is something wrong somewhere else... >From: Bob Ammerman >Reply-To: pic microcontroller discussion list >To: PICLIST@MITVMA.MIT.EDU >Subject: Re: [PIC]: ICD does not run. Please help! >Date: Tue, 5 Mar 2002 07:37:49 -0800 > > > If the crystal is not working you will receive this message. > > > > Friendly Regards > > > > Octavio Nogueira > >He means, of course, the crystal on the target system, not the one on the >ICD. > >Bob Ammerman >RAm Systems > > > =================================================== > > nogueira@propic2.com ICQ# 19841898 > > ProPic tools - low cost PIC programmer and emulator > > http://www.propic2.com > > =================================================== > > > > ----- Original Message ----- > > From: "Thomas" > > To: > > Sent: Tuesday, March 05, 2002 5:43 AM > > Subject: [PIC]: ICD does not run. Please help! > > > > > > > Hello everyone, > > > > > > I built the ICD using the circuit from Microchip. I am able to >program > > and > > > verify the target IC, but when I try to run it (Debug>Run>Run), it >says > > > "Error performing requested operation". Does anyone know what's >wrong? > > > Please help! > > > > > > Thank you in advance! > > > Thomas > > > > > > -- > > > http://www.piclist.com hint: The PICList is archived three different > > > ways. See http://www.piclist.com/#archives for details. > > > > > > > > > > -- > > http://www.piclist.com hint: The PICList is archived three different > > ways. See http://www.piclist.com/#archives for details. > > > > > >-- >http://www.piclist.com hint: The PICList is archived three different >ways. See http://www.piclist.com/#archives for details. > > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.