And you've done 'enable debug mode' on the ICD programmer Options. Kevin

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@mitvma.mit.edu] On Behalf Of Rick C.
> Sent: 05 March 2002 13:36
> To: PICLIST@mitvma.mit.edu
> Subject: Re: [PIC]: ICD does not run. Please help!
>
>
> Also make sure you have a NOP as your first byte in the code. Rick
>
> Thomas wrote:
>
> > Hello everyone,
> >
> > I built the ICD using the circuit from Microchip.  I am able to
> > program and verify the target IC, but when I try to run it
> > (Debug>Run>Run), it says "Error performing requested
> operation".  Does
> > anyone know what's wrong? Please help!
> >
> > Thank you in advance!
> > Thomas
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three
> different
> > ways.  See http://www.piclist.com/#archives for details.
>
> --
> http://www.piclist.com hint: The PICList is archived three
> different ways.  See http://www.piclist.com/#archives for details.
>
>
>
>
> *****************************************************************
> This email has been checked by the altohiway e-Sweeper Service
> *****************************************************************
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.