> -----Original Message-----
> From: Terry [SMTP:t3design@PACIFIC.NET.SG]
> Sent: Tuesday, March 05, 2002 8:24 AM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC]: Serial/USB to I2C interface
>
> Mike, if you're using this for test and analysis, might i suggest serial
> instead of USB? If you've ever used a USB bus analyser and seen the failed
> packets and resends, you'll feel much better using the serial port. Just
> my
> 2cents.
>
> Terry
>
I already have the code roughed out for a serial interface, that's familiar
territory for me!  USB was asked for as a "would like" and I was just
wondering how difficult this would be.  I'm going to take a look at the
Cypress parts, as these seem to be in common use and they provide example
drivers.

Regards

Mike

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.