Alexandre,

I used CorelDraw, Notepad, Hyperterm, and WordPad to test the plotter.
Tried the DOS copy command, too - it didn't work with hardware handshake.
But like I said, 110 baud works just fine.  A little slow, but fast enough
for PCB drawing.

Thank you for your suggestions,

Vitaliy


----- Original Message -----
From: Alexandre Guimaraes <alexg@IIS.COM.BR>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: 03.04.2002 5:47 PM
Subject: Re: [OT]: hp 7475a pen plotter - solution for PCB


> Hi, Vit
>
>     What software did you try to use to send the file to the plotter ?
Some
> programs will ignore completely the handshake lines and not set them the
> right way. Try to use the DOS copy command and see if it does not work
with
> the cables you have made.
>
> Best regards,
> Alexandre Guimaraes
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics