>> If you don't use TRIS, how you configure a port for input or output with
>> these devices?
>>
>Same as with any 14 bit device, you set the bank registers to give you
>access to Bank1, and write directly to the appropriate TRIS register
>(instead of using the 'TRIS' instruction, confusing isn't it?).
>
>Mike


Thank you, Mike. I am a bit curious.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body