> Pic Dude wrote:
> >
> > What am I doing wrong here?  I tried to configure port A as all digital
> > inputs, but can't read from it.  If I replace port A with port C, it
works.
> > Here's the init/main part of my code...
> The dreaded old bank select problem. Read piclist.com and the data
> sheets about register banks and bank switching.
>
> Quentin
>

More likely it is the dreaded old "PORT A initializes as analogs problem",
read the description of ADCON1 in the datasheet.

Bob Ammerman
RAm Systems

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.