Look under "Options/Environment Setup" and look under the "Project" tab. At the bottom, under the "Project Options" section set the "Build Timeout Length" to 0. Douglas Wood Software Engineer dbwood@kc.rr.com Home of the EPICIS Development System for the PIC and SX http://epicis.piclist.com ----- Original Message ----- From: "Bob Barr" To: Sent: Saturday, February 23, 2002 2:38 PM Subject: [PIC]: MPLAB Build Timeout I have just started intermittently getting a "Build Error - Application Timed Out" dialog box when I do a project make. It seems to be occurring when mp2cod is being run. When I click on "Continue Waiting" box, the build completes successfully. I'm running MPLAB 5.50 and haven't been able to find any documentation on this timeout. I've never seen this occur under previous versions but it's so intermittent that it may just have never occurred until my code size grew. Does anyone know of a way to extend the timeout to avoid this? Is there perhaps an MPLAB configuration setting or a DOS/Windows property that I can change? Thanks, Bob -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.