P.S. Jim. I'll make it available on my website for download if you're interested so I won't get flamed for sending it here. :-) Rick James Paul wrote: > Nope, no flicker or burning smell. The screen just went extremely dim. > You can see the screen is still working, but the backlight is not on. > I can run the backlight from an external inverter, and all is well. > A power supply board costs $100.00 and the display assembly is $399.99. > I'll keep you posted on what I find out. Thanks for the insight. > > Regards, > > Jim > > > Did your display flicker a lot before dying? Any burning smell from the > > scope at any stage? My TDS220 did all this a few weeks out of warranty. > > Tek replaced the entire display even though you could still make out > > the display (you had to look really closely though). Cost about $600 if > > I remember correctly. One of my colleagues had a display die but in his > > case the unit was only a few weeks old. I'd be interested to hear how > > you get on with this or if anyone else had similar problems with the > > TDS series. We probably have about 40 of them here. These are the most > > serious problems I'm aware of. > > > > Joe > > > > > > ----- Original Message ----- > > From: "James Paul" > > To: > > Sent: Tuesday, February 19, 2002 9:42 AM > > Subject: [EE]: A Scope Question > > > > > >> All, > >> > >> I have a Tektronix TDS210 Oscilloscope that the backlight just went > >> dark. I've tried changing the contrast, checking the CCFL tube, and > >> associated wiring. All looks and checks good. My next thought was > >> the CCFL inverter circuit. I pulled the two multivibrator > >> transistors and > > checked > >> them and they appear okay. I checked continuity of the inverter > >> transformer and all looks good with it too. I thought for sure it > >> would be either the CCFL tube or the transistors. Anybody have any > >> ideas of what to look for next or in which direction to go from here? > >> A new P.S. board is available from Tek for about $100.00, so if I > >> can't figure out something soon, I'll just order a new board. But > >> if I can get this one going, I'll have the scope back in service > >> sooner. If anyone has any ideas, I'd love to hear them. > >> > >> Thanks and Regards, > >> > >> Jim > >> > >> -- > >> http://www.piclist.com#nomail Going offline? Don't AutoReply us! email > >> listserv@mitvma.mit.edu with SET PICList DIGEST in the body > >> > >> > > > > -- > > http://www.piclist.com hint: To leave the PICList > > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu