At 02:09 PM 2/19/02 -0800, Chris Loiacono wrote:
>Someone posted a link on here a few months ago that was a pretty simple
>solution. A small copper tube with scored break-away sections was available
>in a few different diameters.

Good memory!

Multicore makes one version called Copperset
<http://www.multicore.com/detail.asp?id=35&cat=Accessories>

I have one and use if occasionally - it works well but is actually more
work than the Harwin Track pins I mentioned earlier.

It works best if you use it before the board is populated - place the board
on a smooth steel surface, insert the feed-through pins, then set them with
the impact punch.

dwayne


Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 18 years of Engineering Innovation (1984 - 2002)
  .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
     `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body