Mike, this is indeed a very good page for homebrewing pcbs !
In fact all your pages from here are great!

Vasile
http://www.geocities.com/vsurducan

On Tue, 19 Feb 2002, Mike Harrison wrote:

> For through-linking (i.e. no component leads through holes) you can't
> beat snap-off linking pins - very easy and fast to use.
> See www.netcomuk.co.uk/~wwl/pcbs.html
> Scroll down to 'through plating'
>
>
> On Tue, 19 Feb 2002 11:26:25 -0000, you wrote:
>
> >Having searched the archives without success, can anyone suggest a good
> >way to do vias on smt double sided boards in low volume production ....
> >
> >Most of my stuff is single sided hand soldered, but I have a short run
> >of two sided with half a dozen vias needed on each densely packed board
> >
> >For prototypes I just use scrap from led legs otherwise discarded, and
> >soldered both sides, but something faster is needed with a few hundred
> >vias to do.
> >
> >Stuart Meier
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body