Supposedly my copy of AutoCad Inventor will read and save dwgs and iges.
If you want to email it to me, I'll convert it.

At 03:05 PM 2/13/2002 -0600, Lawrence Lile wrote:
>Nope.  This is a 3D model, and Cad system "B' cleverly only imports DXF's as
>flat parts, in order to be INcompatible with competitor AutoCad.  Phooey.
>
>--Lawrence
>----- Original Message -----
>From: "Spehro Pefhany" <speff@INTERLOG.COM>
>To: <PICLIST@MITVMA.MIT.EDU>
>Sent: Wednesday, February 13, 2002 2:42 PM
>Subject: Re: [OT]: ACAD/IGES translation
>
>
> > At 01:54 PM 2/13/02 -0600, you wrote:
> > >Anybody out there got a way to translate AutoCad 14 to IGES?  I have a
> > >mechanical drawing of a circuit board that I ported to AutoCad from
>Eagle.
> > >So far so good, but I need to read that drawing with another CAD system
>that
> > >doesn't speak AutoCad, but does speak IGES.  IGES used to be an opotion
>in
> > >AutoCad 13, but was removed in 14.
> >
> > Can you use DXF instead?
> >
> > Best regards,
> >
> > Spehro Pefhany --"it's the network..."            "The Journey is the
>reward"
> > speff@interlog.com             Info for manufacturers:
>http://www.trexon.com
> > Embedded software/hardware/analog  Info for designers:
>http://www.speff.com
> > 9/11 United we Stand
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
> >
> >
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.

_____________________________________________________________
Cris Wilson
Information Resource Consultant
College of Architecture, Arts, and Humanities
Clemson University
cris@clemson.edu
To report problems email: aah_computers@clemson.edu

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.