Nope.  This is a 3D model, and Cad system "B' cleverly only imports DXF's as
flat parts, in order to be INcompatible with competitor AutoCad.  Phooey.

--Lawrence
----- Original Message -----
From: "Spehro Pefhany" <speff@INTERLOG.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, February 13, 2002 2:42 PM
Subject: Re: [OT]: ACAD/IGES translation


> At 01:54 PM 2/13/02 -0600, you wrote:
> >Anybody out there got a way to translate AutoCad 14 to IGES?  I have a
> >mechanical drawing of a circuit board that I ported to AutoCad from
Eagle.
> >So far so good, but I need to read that drawing with another CAD system
that
> >doesn't speak AutoCad, but does speak IGES.  IGES used to be an opotion
in
> >AutoCad 13, but was removed in 14.
>
> Can you use DXF instead?
>
> Best regards,
>
> Spehro Pefhany --"it's the network..."            "The Journey is the
reward"
> speff@interlog.com             Info for manufacturers:
http://www.trexon.com
> Embedded software/hardware/analog  Info for designers:
http://www.speff.com
> 9/11 United we Stand
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.