----- Original Message ----- From: "Peter L. Peres" To: Sent: Tuesday, February 12, 2002 3:38 PM Subject: [PIC]: Program Warp13 in DOS? > mpasm will run in a dos window as well as under dos only. Read or print > the manual from Windows before that (especially the command line options). > You set the file type it produces using the f= option in the list > directive. Under MPLAB this defaults to .cod but you can specify inhx8m > inhx16 or inhx32 (inhx16 is no longer supported apparently). Warp13 > probably takes inhx8m. > > hope this helps, Not really 'cause that creates a HEX file from an ASM. I'm looking to write a HEX to the Warp13 programmer in DOS. > Peter > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > > -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.