Hi,

> If you have no AgPd pads on ceramic- and no other unknowns, there's no
> reason to spend on paste with silver content, which, btw is normally about
> 2% silver but much higher priced. 63/37 is generally much less costly. I
> would see if they are trying to sell you some silver, and check with other
> distributors.

    Almost all manufactures uses silver on the pads of SMT multilayer
capacitors. Any pic projects would have those. I prefer to use silver solder
also because it reflows better on the toaster oven. The price difference is
not that much.

Best regards,
Alexandre Guimaraes

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.