For small pieces (euro card size) i make a cut with a
sharp knife on the front and back of the PCB (cut a
couple of times) and brake it on the edge of a table.


grtz

Simon

 --- Peter Barick <A20PJB1@WPO.CSO.NIU.EDU> wrote: >
Hi All,
>
> I would like to cut PCB straight but without a
> special cutter.
>
> Has anyone experience using a table saw with a small
> dia. (4 inch)
> "metal, plastics" blade? I have the saw but not the
> metal blade yet.
>
> In prior hobby pcb work, I used a coping saw or even
> a hack saw. These
> methods left uneven edges which I then filed, sanded
> straight.
>
> I'm looking for a better way.
>
> Peter, PIC Newbie
>
> --
> http://www.piclist.com hint: PICList Posts must
> start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other
> [BUY]:,[AD]: ->Ads
>
>
>
>

__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics