No, in the example, the data is coming from literals.

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@mitvma.mit.edu] On Behalf Of Jinx
> Sent: 07 February 2002 22:19
> To: PICLIST@mitvma.mit.edu
> Subject: Re: [PIC]: 16F628 EEPROM write routine
>
>
> > > So is EEADR in bank 0 or 1? The data sheet itself, page
> > 14 for example, show them all in bank 1, but you are saying
> that the
> > 'data and address indices aren't in bank 1'???
>
> No, I should repeat that -
>
> MY data and indices, not the PIC's. EEADR and EEDATA are
> in bank1, the data I want to store and the info on where it
> should go are in Bank0.
>
> In Example 13-2 of the errata, the data is being got from a
> Bank1 RAM address, without explanation that the data could be
> got from any RAM in any bank if the bank select bits are set
> appropriately. Then set the bank bits to access EEDATA and EEADR
>
> --
> http://www.piclist.com hint: The list server can filter out
> subtopics (like ads or off topics) for you. See
http://www.piclist.com/#topics




*****************************************************************
This email has been checked by the altohiway e-Sweeper Service
*****************************************************************

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads