I wouldn't recommend entering values in code unless it's a last resort, but
I've had to do it before - for the same reasons as you.  At the point where
you want to insert the sim value, just do a MOVLW (value) followed by MOVWF
PORTA.

If you're just trying to change certain bits, pin and async also work well.

Jen


> I use register stimulus, but how can I enter a value in code?
>
> At 15.23 09/02/02 -0500, you wrote:
> >How are you changing the values of PORTA?  (e.g., Pin
> Stimulus, Register
> >Stimulus, Async Stimulus, or entering a value in code)
> >
> >
> > > -----Original Message-----
> > > From: pic microcontroller discussion list
> > > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Renzo Giurini
> > > Sent: Saturday, February 09, 2002 3:15 PM
> > > To: PICLIST@MITVMA.MIT.EDU
> > > Subject: [PIC]:MPLAB Sim
> > >
> > >
> > > Hi,
> > > I try to use MPLAB Sim in a program for a 16f84.
> > > Porta is set as input. I try to change the values of Porta
> > > but nothing happens.
> > >
> > > If I set Porta as output my simulations works.
> > >
> > > What is wrong?
> > >
> > > Thanks
> > > Renzo Giurini
> > >
> > > --
> > > http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> > > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
> > >
> > >
> >
> >--
> >http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> >email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body