At 03:16 PM 2/9/02 -0500, Dan Lanciani wrote: >Bob Ammerman wrote: > >|I tried to figure out a way to better this and all I could come up with is >|to use an interrupt input. In that case uncertainty to the first instruction >|of the interrupt routine is 1 instruction time, even if the processor was >|executing a 2-cycle instruction. Obviously, this must be the only interrupt >|enabled for this technique to work. > >I was looking at interrupts as well, in the data sheet of a 16F628 that I was >using for something else. But when I went to look at the 16C54 (and family) >I didn't see any mention of interrupts at all. Does it support them? Nope - no interrupts in the 12 bit core devices. dwayne Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 18 years of Engineering Innovation (1984 - 2002) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body