K|bek Tony wrote:

>
> Well it means that the following statement ( and similar ):
> >        MOVLW   SSPSTAT ; get adress for synch serial port status reg
> >        MOVWF   FSR     ; setup fsr
> >        MOVLW   0x00; (1<<CKE) ; data tx at rising edge
> >        MOVWF   INDF    ; and store it
>
> Is not recomended by Mchip.

What's the reason for that.
I've checked a number of MCHIP data books and found only one reference
to FSR and INDF, an example of clearing an area of RAM. Couldn't find
advice against using the registers the way you did.



>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body