OK, but I can't generate the Gerbers.  Asks for wheel files and all-sorts.  What
a newby I am!
David

Martin Peach wrote:

> You do File->Import and pick the folder with your gerbers in it. It took me
> a few tries to get all the setup right because there are lots of options.
> You can either print to a printer or do a Print Screen and paste into
> Clipboard viewer and save as a bmp from there, then use GIMP or Photoshop to
> scale the image...
> /\/\/\/*=Martin
>
> ----- Original Message -----
> From: "David P. Harris" <dpharris@TELUS.NET>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Friday, February 08, 2002 5:44 PM
> Subject: Re: [ot]: eagle board editor question
>
> > How do you use this.  I can't even figure out how to do the CAM
> processing.
> > Can you outline the steps you take.  For example, which output device do I
> use -
> > my guess: Gerber_auto_23.
> > David
> >
> > Martin Peach wrote:
> >
> > > GC-Prevue from Graphicode at http://www.graphicode.com/ works better for
> me.
> > > It allows you to print any layer or combination of layers including the
> > > drill holes so you could do a single board 'manually'.
> > > /\/\/\/*=Martin
> > >
> > > ----- Original Message -----
> > > From: "Edson Brusque" <ebrusque@TERRA.COM.BR>
> > > To: <PICLIST@MITVMA.MIT.EDU>
> > > Sent: Friday, February 08, 2002 11:47 AM
> > > Subject: Re: [ot]: eagle board editor question
> > >
> > > > Hello rad0,
> > > >
> > > > > If you're still around, how does a gerber file orient itself?  I
> mean,
> > > if
> > > > > you
> > > > > have made a board in eagle somewhere off the origin, then produced a
> > > > > gerber file for your board,
> > > > > what's the gist of how a gerber file orients all the parts together
> on
> > > the
> > > > > board??
> > > >
> > > >     please, download ViewMate (www.lavenir.com) it's a free Gerber
> file
> > > > viewer and will thought some things. Also, it's very usefull when
> you're
> > > > trying to make gerber output files with Eagle.
> > > >
> > > >     Best regards,
> > > >
> > > >     Brusque
> > > >
> > > > -----------------------------------
> > > > Edson Brusque
> > > > Research and Development
> > > > C.I.Tronics Lighting Designers Ltda
> > > > Blumenau  -  SC  -  Brazil
> > > > www.citronics.com.br
> > > > Say NO to HTML mail
> > > > -----------------------------------
> > > >
> > > > --
> > > > http://www.piclist.com hint: The PICList is archived three different
> > > > ways.  See http://www.piclist.com/#archives for details.
> > > >
> > > >
> > >
> > > --
> > > http://www.piclist.com hint: The PICList is archived three different
> > > ways.  See http://www.piclist.com/#archives for details.
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
> >
> >
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.