How do you use this.  I can't even figure out how to do the CAM processing.
Can you outline the steps you take.  For example, which output device do I use -
my guess: Gerber_auto_23.
David

Martin Peach wrote:

> GC-Prevue from Graphicode at http://www.graphicode.com/ works better for me.
> It allows you to print any layer or combination of layers including the
> drill holes so you could do a single board 'manually'.
> /\/\/\/*=Martin
>
> ----- Original Message -----
> From: "Edson Brusque" <ebrusque@TERRA.COM.BR>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Friday, February 08, 2002 11:47 AM
> Subject: Re: [ot]: eagle board editor question
>
> > Hello rad0,
> >
> > > If you're still around, how does a gerber file orient itself?  I mean,
> if
> > > you
> > > have made a board in eagle somewhere off the origin, then produced a
> > > gerber file for your board,
> > > what's the gist of how a gerber file orients all the parts together on
> the
> > > board??
> >
> >     please, download ViewMate (www.lavenir.com) it's a free Gerber file
> > viewer and will thought some things. Also, it's very usefull when you're
> > trying to make gerber output files with Eagle.
> >
> >     Best regards,
> >
> >     Brusque
> >
> > -----------------------------------
> > Edson Brusque
> > Research and Development
> > C.I.Tronics Lighting Designers Ltda
> > Blumenau  -  SC  -  Brazil
> > www.citronics.com.br
> > Say NO to HTML mail
> > -----------------------------------
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
> >
> >
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.