GC-Prevue from Graphicode at http://www.graphicode.com/ works better for me.
It allows you to print any layer or combination of layers including the
drill holes so you could do a single board 'manually'.
/\/\/\/*=Martin

----- Original Message -----
From: "Edson Brusque" <ebrusque@TERRA.COM.BR>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, February 08, 2002 11:47 AM
Subject: Re: [ot]: eagle board editor question


> Hello rad0,
>
> > If you're still around, how does a gerber file orient itself?  I mean,
if
> > you
> > have made a board in eagle somewhere off the origin, then produced a
> > gerber file for your board,
> > what's the gist of how a gerber file orients all the parts together on
the
> > board??
>
>     please, download ViewMate (www.lavenir.com) it's a free Gerber file
> viewer and will thought some things. Also, it's very usefull when you're
> trying to make gerber output files with Eagle.
>
>     Best regards,
>
>     Brusque
>
> -----------------------------------
> Edson Brusque
> Research and Development
> C.I.Tronics Lighting Designers Ltda
> Blumenau  -  SC  -  Brazil
> www.citronics.com.br
> Say NO to HTML mail
> -----------------------------------
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.