wouter van ooijen & floortje hanneman wrote:
>
> > Did I read in a thread recently that a fast starting oscillator is also a
> > potential problem?  Should I ground the OCS1 while programming?
>
> That's the vcc to vpp rise: you can get away with a slow rise when it does
> not 'span' more than X clock cycles.
>
> > I'm guessing I don't need to tie LVP low if I'm using HVP, correct?
>
> Might work, might not work. Better be safe than sorry.

That was the reason I put an open collector output on the Pocket
programmers ICSP port. It is pulled low whenever the device enters
program mode.

--
Best regards

Tony

mICros
http://www.bubblesoftonline.com
mailto:sales@bubblesoftonline.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu