Dans_PIC_Stuff <PICLIST@mitvma.mit.edu> wrote:

> How can I connect a scope to a resonator to measure it's actual
> frequency? I took a 16F84 with a 4MHz resonator to my Electronics AC
> circuits class and tried testing it on one of their scopes but it
> didn't look too prety and it made the PIC's program slow down
> dramatically.  Any tips?

Dan:

Put the scope probe on the Xtal OUT pin, not Xtal IN.

-Andy

=== Andrew Warren -- aiw@cypress.com
=== Principal Design Engineer
=== Cypress Semiconductor Corporation
===
=== Opinions expressed above do not
=== necessarily represent those of
=== Cypress Semiconductor Corporation

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads