I have underpinnings for undo in place but it does not work yet.

Al Williams
AWC
* 8 channels of PWM
http://www.al-williams.com/awce/pak5.htm



> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Gaston Gagnon
> Sent: Tuesday, January 29, 2002 11:13 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [EE]: Ascii text "drawing" software -- ASCIICAD
>
>
> Al Williams a icrit :
> >
> > It isn't as handy as it could be, but yes, just set the tool to the
> > letter you want it to place and just left click.
> >
> Thanks, I should have figure that one out.
> An other one. As it is very easy overwrite something by
> mistake, do you plan to make undo (Ctrl-z) operational or is
> it already? Gaston
>
> > Al Williams
> > AWC
> > * Easy RS-232 Prototyping http://www.al-williams.com/awce/rs1.htm
> >
> > > -----Original Message-----
> > > From: pic microcontroller discussion list
> > > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Gaston Gagnon
> > > Sent: Tuesday, January 29, 2002 10:46 PM
> > > To: PICLIST@MITVMA.MIT.EDU
> > > Subject: Re: [EE]: Ascii text "drawing" software -- ASCIICAD
> > >
> > >
> > > Is it possible to insert text like C and .1uF ?
> > > Regards,
> > > Gaston
> > >
> > > Al Williams a icrit :
> > > >
> > > > OK, my last version of ASCIICAD is up for the day :-)
> > > >
> > > > Version 1.4 has a grid (switchable) and the facility to
> load parts
> > > > >From a library. Just draw your library in the top left
> corner of
> > > > A blank screen (or use cut and paste to put it there)
> and save it.
> > > >
> > > > Then in another drawing Shift+Click (left click) and
> use Insert |
> > > > Library to open a library file and put its contents in the
> > > workspace.
> > > > I'm including a resistor library to get you started.
> > > >
> > > > I hate when I get a wild hair like this :-)
> > > >
> > > > ASCIICAD:
> > > > http://wd5gnr.virtualave.net/cgi-bin/TWiki/view.pl/Main/AsciiCad
> > > >
> > > > Use UserID: GuestUser
> > > > And Password: guest
> > > >
> > > > (both case-sensitive).
> > > >
> > > > Al Williams
> > > > AWC
> > > > * Control 8 servos at once
> > > > http://www.al-williams.com/awce/pak8.htm
> > > >
> > > > --
> > > > http://www.piclist.com hint: The PICList is archived three
> > > different
> > > > ways.  See http://www.piclist.com/#archives for details.
> > >
> > > --
> > > http://www.piclist.com hint: The PICList is archived
> three different
> > > ways.  See http://www.piclist.com/#archives for details.
> > >
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three
> different
> > ways.  See http://www.piclist.com/#archives for details.
>
> --
> http://www.piclist.com hint: The PICList is archived three
> different ways.  See http://www.piclist.com/#archives for details.
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.