Yep, I corrected myself right after I sent it.

                                        Regards,

                                            Jim
----- Original Message -----
From: Tony Nixon <Tony.Nixon@ENG.MONASH.EDU.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, January 29, 2002 4:50 PM
Subject: Re: [PIC]: Re: Do I need pull-up resistors on PortA of a 16F877 ?


> James Paul wrote:
> >
> >  Tim,
> >
> >  PORTA,2 is an open Drain pin.  It needs the pullup.  Others don't
because
> >  they are basically totem pole outputs with FET's.
> >
> >                                                    Regards,
> >
> >                                                      Jim
>
> RA4 I do belive :-)
>
>
> --
> Best regards
>
> Tony
>
> mICros
> http://www.bubblesoftonline.com
> mailto:sales@bubblesoftonline.com
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.