You'll get varying opionions about soldering to a battery, some good, some
bad.  I'd avoid it. But you could also use conductive epoxy if this is a
one-off.  I think you can get it from mouser or jameco, etc.  There may also
be a clip that fits this battery.

--Lawrence



----- Original Message -----
From: "Kevin A. Benedict" <kben@DCA.NET>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, January 28, 2002 6:30 PM
Subject: [EE]:Safely connecting a wire to a terminal-less battery


> Hi Everyone,
> I accidently ordered the NiMH batteries that are completely flat,
> no terminal to connect a wire too. Is their a safe way to do this
> I know soldering a wire directly to the battery causes battery
> damage.
> Thanks in advance,
>                  Kevin
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.