Hello All,



I need to drive a relay from a pic pin. I know how to do this with a
2.2k resistor to the base of a NPN transistor with the emitter to ground
and the collector to vcc through the coil on the relay. I have also
placed a diode etc in the circuit in the circuit reverse biased across
the relay coil.



My question is that I need 2 identical relays to pull up off the same
pic output pin. Can one pic output safely drive 2 of the above circuits?



Regards,

Steve

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu