At 12:25 AM 1/24/02 -0700, Vitaliy Maksimov wrote:
>Hello List,
>
>The process of using a toaster oven for small runs is impressive, but did
>anyone try to solder 7 Segment displays using the same method?  Or would it
>be more practical to solder those with a soldering iron, after taking the
>board out of the oven and letting it cool down?  I guess I'm just afraid
>that the temperature (400F) is a bit too high for the plastic..

It may be. You can check the specs, or just cycle a display through, the
results should be obvious. :)

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.