Yes, but is it possible to do it just like a goto lable, where you don't have to set the value of the lable being used. I.E. MAIN CALL INTIALIZE BTSFSS FLAGS,CALL_RESULT BRA MyRoute MOVFF ... .... MyRoute MOVF PORTC,W,A -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Andrew Warren Sent: Wednesday, January 23, 2002 12:17 AM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]BRA and other 18cxxx branch instructions James Williams wrote: > Is it possible to use labels for the BRA instruction, so as to hide > the details of where the branch [destination] lies? Yes, of course. -Andrew === Andrew Warren -- aiw@cypress.com === Principal Design Engineer === Cypress Semiconductor Corporation === === Opinions expressed above do not === necessarily represent those of === Cypress Semiconductor Corporation -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics