On 22-Jan-02 WEBB,TIM (A-Sonoma,ex1) wrote:
> I will be making an adapter that will connect between the PicStart Plus
> Development Programmer and my development board I am currently designing.
>
> I am using a 4-Pin 20 MHz chip oscillator (SG-615P) with an Enable pin which
> I can tie to gnd to disable the CLK.
>
> I currently don't use the LVP mode.
>
> Doesn't Microchip have an App note for ICSP?  I could not find anything on
> their site.

Try typing ICSP into the "Search the Site" box..    It takes you directly to
30277b.pdf   and several others that will tell you all you need to know.

There is more than enough info there , I know because I built my 877 programmer
using the info in the app notes.

Peter.


----------------------------------
E-Mail: Peter Onion <ponion@srd.bt.co.uk>
Date: 23-Jan-02
Time: 10:07:49

This message was sent by XFMail
----------------------------------

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics