Hi Dom,
I tried everything(no luck) and then waited for my $20 ZIF
socket to arrive from www.digikey.com, soldered it in,
removed R9 and have been programming f628s since then.

>At 04:03 PM 1/21/02 EST, Kevin A. Benedict wrote:
>>Hi Dom,
>>Try http://users.pipeline.com.au/newfound/trouble%20shoot.htm
>>I ended up removing resistor R9 and soldering an 18 pin
>>ZIF socket in, works fine now. I could not get ISP to work.
>
>Hmm...I both isolated (from the programmer) and grounded pin 10 (LVP)
>which I thought was the key, but still no luck.
>
>I don't have a 18 pin zif handy....   :-(
>could use a reg. 18 pin socket, but would be disappointed if that
>gives me the same results as grounding pin 10 (i.e. still doesn't work)
>
>
>>>Warp-13 and 16F628
>>>Anyone get this combination to work?
>>>
>>>I isolated pin 10 by using two stacked sockets with pin 10 banged out.
>>>But doesn't program.  :-(
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu