on 18/1/02 4:42 PM, Jinx at joecolquitt@CLEAR.NET.NZ wrote:

Hi Joe,

> I seem to be out-suggested pull-down vs pull-up 3:1, but if the
> resistor is a pulldown and the LED is Vcc to pin, surely the
> blip will still occur ? It will come on at power-up and go off only
> when the pin is driven high

I have not tried either, because the blip does not happen on the plastic
parts - only on the JW versions. It must have something to do with the
startup time of the JW parts.

Regards,

Sean

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics